Qaybta Gudbinta Indhaha ee Mylinking™ SFP LC-SM 1310nm 10km

ML-SFP-SX 1.25Gb/s SFP 1310nm 10km LC Hal-Qaabka

Sharaxaad Gaaban:

Qalabka Mylinking™ RoHS ee 1.25Gbps 1310nm ee gudbiyaha indhaha 10km Reach waa qalab waxqabad sare leh, kharash-ool ah oo taageera heerka xogta laba-jibbaaran ee 1.25Gbps/1.0625Gbps iyo masaafada gudbinta 10km oo leh SMF. Qalabka gudbiyaha wuxuu ka kooban yahay saddex qaybood: gudbiye FP laser ah, sawir-qaade PIN ah oo lagu daray qalab horudhac ah oo gudbiya is-beddelka (TIA) iyo cutubka xakamaynta MCU. Dhammaan qaybaha waxay buuxinayaan shuruudaha badbaadada laysarka fasalka I. Qalabka gudbiyaha waxay la jaan qaadayaan Heshiiska Ilo-badan ee SFP (MSA) iyo SFF-8472. Wixii macluumaad dheeraad ah, fadlan tixraac SFP MSA.

Noo soo dir emayl

Faahfaahinta Badeecada

Calaamadaha Alaabta

Tilmaamaha Badeecada

● Waxay taageertaa heerarka bit-ka 1.25Gbps/1.0625Gbps

● Isku xirka LC ee Duplex

● Raad-raaca kulul ee SFP ee la xiri karo

● Gudbiyaha laysarka 1310nm FP iyo sawir-qaade PIN ah

● Waxaa lagu dabaqi karaa isku xirka 10Km SMF

● Isticmaalka korontada oo hooseeya,< 0.8W

● Is-dhexgalka Kormeeraha Baarista Dijital ah

● Waafaqsan SFP MSA iyo SFF-8472

● EMI aad u hooseeya iyo ilaalin ESD oo aad u fiican

● Heerkulka kiiska hawlgalka:

Ganacsi: 0 ilaa 70 °C

Warshadaha: -40 ilaa 85 °C

Codsiyada

● Gigabit Ethernet

● Kanaalka Fiber-ka

● U beddel is-dhexgalka Switch

● Codsiyada dib-u-habaynta ee la beddelay

● Isku-xirka router-ka/server-ka

● Nidaamyada kale ee gudbinta indhaha

Jaantuska Shaqada

Qiimaynta Ugu Badan ee Dhabta ah

Halbeegga	Astaan	Ugu yaraan.	Ugu badnaan.	Cutubka	Fiiro gaar ah
Danab Bixinta	Vcc	-0.5	4.0	V
Heerkulka Kaydinta	TS	-40	85	°C
Qoyaanka Qaraabada ah	RH	0	85	%

Fiiro gaar ah: Cadaadiska ka badan qiimeynta ugu badan ee kama dambaysta ah wuxuu sababi karaa dhaawac joogto ah oo soo gaara gudbiyaha.

Astaamaha Hawlgalka Guud

Halbeegga	Astaan	Ugu yaraan.	Nooca	Ugu badnaan.	Cutubka	Fiiro gaar ah
Heerka Xogta	DR		1.25		Gb/s
Danab Bixinta	Vcc	3.13	3.3	3.47	V
Hadda Bixinta	Icc₅			220	mA
Heerkulka Kiiska Hawlgalka.	Tc	0		70	°C
Heerkulka Kiiska Hawlgalka.	TI	-40		85	°C

Astaamaha Korontada (SAARKA UGU SARE(C) = 0 ilaa 70 ℃, SARKA UGU SARE(I) = -40 ilaa 85 ℃, VCC = 3.13 ilaa 3.47 V)

Halbeegga	Astaan	Ugu yaraan.	Nooca	Ugu badnaan.	Cutubka	Fiiro gaar ah
Gudbiye
Kala-guurka xogta kala duwan	VIN,PP	120		820	mVpp	1
Tx Dami gelinta-sare	VIH	2.0		Vcc+0.3	V
Tx Dami Gelinta-Hoose	VIL	0		0.8	V
Wax soo saarka cilladda Tx-Sare	VOH	2.0		Vcc+0.3	V	2
Wax soo saarka cilladda Tx-Hoose	VOL	0		0.5	V	2
Impedance kala duwanaanta gelinta	Rin		100		Ω
Qaataha
Kala-soocidda wax soo saarka xogta kala duwan	Vout,pp	300	650	800	mVpp	3
Wax soo saarka Rx LOS-Sare	VROH	2.0		Vcc+0.3	V	2
Wax soo saarka Rx LOS-Hoose	VROL	0		0.8	V	2

Qoraalo:

1. TD+/- waa AC gudaha ah oo ay weheliyaan joojinta kala duwan ee 100Ω gudaha moduleka.

2. Tx Fault iyo Rx LOS waa wax soo saar ururiyayaal furan, kuwaas oo la jiidi karo iyadoo la adeegsanayo iska caabin 4.7k ilaa 10kΩ ah oo ku yaal guddiga martida loo yahay. Kor u qaad danabka inta u dhaxaysa 2.0V iyo Vcc+0.3V.

3. Wax soo saarka RD+/- waxaa gudaha AC ku xiran, waana in lagu dhammeeyaa 100Ω (kala duwanaansho) marka la isticmaalayo SERDES.

Astaamaha Indhaha (SAARKA UGU SARE(C) = 0 ilaa 70 ℃, SAARKA UGU SARE(I) = -40 ilaa 85 ℃,VCC = 3.13 ilaa 3.47 V)

Halbeegga	Astaan	Ugu yaraan.	Nooca	Ugu badnaan.	Cutubka	Fiiro gaar ah
Gudbiye
Mowjadda Hawlgalka	λ	1290	1310	1330	nm
Awoodda wax soo saarka ee Ave. (La awoodsiiyay)	LAAMEYN	-9		-3	dBm	1
Saamiga Dabar-goynta	ER	9			dB	1
Ballaca muuqaalka RMS	Δλ			0.65	nm
Waqtiga Kor u kaca/Dayrta (20% ~ 80%)	Tr/Tf			0.26	ns	2
Ciqaabta kala-fidinta	TDP-ga			3.9	dB
Indhaha Indhaha ee Soo Baxa	Waafaqsan IEEE802.3 z (badbaadada heerka 1aad ee aser)
Qaataha
Mowjadda Hawlgalka	λ		1310		nm
Xasaasiyadda Qaataha	PSEN1			-22	dBm	3
Culays xad-dhaaf ah	LAAMEYN	0			dBm	3
LOS waxay ku adkeysaneysaa	Pa	-35			dBm
LOS De-assert	Pd			-24	dBm
Lumis-jiif LOS	Pd-Pa	0.5			dB

Qoraalo:

1. Lagu cabbiray 1.25Gb/s iyadoo la adeegsanayo PRBS 2 2^{23 – 1}Qaabka tijaabada NRZ.

2. Lama sifeyn, oo lagu cabbiray PRBS2^{23 – 1}qaabka tijaabada @1.25Gbps

3. Lagu cabbiray 1.25Gb/s iyadoo la adeegsanayo PRBS 2^{23 – 1}Qaabka tijaabada NRZ ee BER < 1x10^-12

Qeexitaannada iyo Hawlaha Pin-ka

Biin	Astaan	Magaca/Sharaxaadda	Qoraallo
1	VeeT	Dhulka Tx
2	Cillad Tx ah	Tilmaamaha cilladaha Tx, Soo-saarka Ururinta Furan, "H" firfircoon	1
3	Dami Tx	LVTTL Input, soo jiid gudaha ah, Tx waa la joojiyay "H"	2
4	MOD-DEF2	gelinta/soo-saarka xogta ee is-dhexgalka taxanaha ah ee 2-fiilo (SDA)	3
5	MOD-DEF1	gelinta saacadda is-dhexgalka taxanaha ah ee 2-fiilo ah (SCL)	3
6	MOD-DEF0	Tilmaamaha hadda ee moodeelka	3
7	Qiimee doorashada	Xiriir ma jiro
8	LOS	Lumitaanka Rx ee calaamadda, Wax soo saarka Ururinta Furan, "H" firfircoon	4
9	VeeR	Rx dhul
10	VeeR	Rx dhul
11	VeeR	Rx dhul
12	RD-	Xogta la helay ee rogaal celiska ah ayaa la soo saaray	5
13	RD+	Xogta la helay waa la bixiyay	5
14	VeeR	Rx dhul
15	VccR	Koronto Rx ah
16	VccT	Koronto la'aan TX ah
17	VeeT	Dhulka Tx
18	TD+	Gudbi xogta gudaha	6
19	TD-	Xogta gudbinta rogan ee gudaha	6
20	VeeT	Dhulka Tx

Qoraalo:

1. Marka uu sarreeyo, natiijadani waxay muujinaysaa cillad laysar ah oo nooc ka mid ah. Hoos u dhacu wuxuu muujinayaa hawlgal caadi ah. Waana in kor loo soo jiido iyadoo la adeegsanayo iska caabin 4.7 – 10KΩ ah oo ku taal guddiga martida loo yahay.

2. TX disable waa qalab loo isticmaalo in lagu xiro wax soo saarka indhaha ee gudbiyaha. Waxaa lagu soo jiidaa gudaha module-ka iyadoo la adeegsanayo iska caabin 4.7 – 10KΩ ah. Xaaladihiisu waa:

Hoose (0 – 0.8V): Gudbiyuhu wuu shaqeeyaa (>0.8, < 2.0V): Lama qeexin

Sare (2.0V~Vcc+0.3V): Gudbiye Naafo ah Furan: Gudbiye Naafo ah

3. Mod-Def 0,1,2. Kuwani waa biinanka qeexida module-ka. Waa in lagu soo jiidaa iska caabin 4.7K – 10KΩ ah oo ku taal guddiga martida loo yahay. Danabka jiidista waa inuu u dhexeeyaa 2.0V ~Vcc + 0.3V.

Mod-Def 0 waxaa saldhig u ah module-ka si uu u muujiyo in module-ku uu joogo

Mod-Def 1 waa xariiqda saacadda ee is-dhexgalka taxanaha laba-silig ah ee aqoonsiga taxanaha ah

Mod-Def 2 waa khadka xogta ee is-dhexgalka laba-silig ee taxanaha ah ee aqoonsiga taxanaha ah

4. Marka uu sarreeyo, wax soo saarkani wuxuu muujinayaa luminta calaamadda (LOS). Hooseyntu waxay muujinaysaa hawlgal caadi ah.

5. RD+/-: Kuwani waa wax soo saarka kala duwanaanshaha qaataha. Waa khadadka kala duwan ee AC ee ku xiran 100Ω kuwaas oo lagu joojinayo 100Ω (kala duwanaansho) marka la isticmaalayo SERDES. Isku xirka AC waxaa lagu sameeyaa gudaha module-ka sidaas darteed looma baahna guddiga martida loo yahay.

6. TD+/-: Kuwani waa qalabka gudbinta kala duwan. Waa khadadka AC-ku xiran, oo leh 100Ω kala duwanaansho ah oo ku jira module-ka. Isku xirka AC-ga waxaa lagu sameeyaa gudaha module-ka sidaas darteed looma baahna guddiga martida loo yahay.

Tilmaamaha Baadhista Dijital ah

Qalabka gudbinta waxaa loo isticmaali karaa nidaamyada martida loo yahay ee u baahan baaritaanno dijitaal ah oo gudaha ama dibadda lagu hagaajiyay.

Halbeegga	Astaan	Cutubyo	Ugu yaraan.	Ugu badnaan.	Saxnaanta	Fiiro gaar ah
Heerkulka Gudbiyaha	DTemp-E	ºC	-45	+90	±5ºC	1
Danabka sahayda gudbiyaha	DVoltage	V	2.8	4.0	±3%
Hadda eexda gudbiyaha	DBias	mA	2	15	±10%	2
Awoodda wax soo saarka gudbiyaha	DTx-Awood	dBm	-10	-2	±3dB
Celceliska awoodda gelinta ee qaataha	DRx-Awood	dBm	-25	0	±3dB